Filter
Top Products
Configuring the Scanner Settings
40
3
Outline to Use Scan to Print
The following overview diagram shows the preparation steps for printing scan
data by Print Scan. Note that the underlined
steps are essential.
Reference
There are three types of setup items: 1) items that you can configure settings
using the control panel of this machine, 2) items that you can configure set-
tings using a Web browser on a client computer, 3) items that you can config-
ure settings using both of the above. See p.41 “Initial Scanner Setup” for
details.
This manual covers only the setting procedures that you can perform using
the control panel of this machine. For details about settings this manual does
not cover, see the Web Status Monitor Help. For information about how to
view the Web Status Monitor, see p.84 “Accessing the Scanner”
*1
This step is essential only when you use a network printer. This step is not essential
when you use a local printer.
Configure
[
1.
System Settings
]
on this ma-
chine
*1
See p.52 “System Settings”
Configure
[
2.
SendScan Settings
]
on this ma-
chine or on the Web Status Monitor
See p.59 “Scanner Settings”
Configure
[
Printer
]
and [Custom Title] settings
on the Web Status Monitor
See p.96 “Information to register in
[Printer]”
See the Web Status Monitor Help for
details about Custom Title settings.
Configure [General Settings] on the Web Status
Monitor
See the Web Status Monitor Help.
Configure [3.PrintScanSettings] and [5.Print Set-
tings] on this machine or on the Web Status
Monitor
See p.67 “Print Scan Settings” and p.70
“Registering Scan Settings”
Recall the Settings on the Web Status Monitor
See p.98 “Recalling the Settings” for
details.