Filter
Top Products
Teledyne API T703 Calibrator Operation Manual Operating The T703 over the Serial I/O Ports
123
7.5.1.1. Manually Configuring the Network IP Addresses
here are several circumstances when you may need to manually set the Ethernet configuration:
Your LAN is not running a DHCP software package,
The DHCP software is unable to initialize the calibrator’s interface;
You wish to configure the interface with a specific IP address, such as for a permanent Ethernet
connection..
Manually configuring the Ethernet interface requires that you first turn DHCP to OFF before setting the
INSTRUMENT IP, GATEWAY IP and SUBNET MASK parameters
07223B DCN6378