Filter
Top Products
Teledyne API T703 Calibrator Operation Manual Getting Started
25
VENTILATION CLEARANCE: Whether the calibrator is set up on a bench or installed into an instrument rack,
be sure to leave sufficient ventilation clearance.
AREA MINIMUM REQUIRED CLEARANCE
Back of the instrument 10 cm / 4 inches
Sides of the instrument 2.5 cm / 1 inch
Above and below the instrument. 2.5 cm / 1 inch
Various rack mount kits are available for this calibrator. See Section 5 of this manual for more information.
3.1.1. MODEL T703 CALIBRATOR
Figure 3-1 shows the location of the front panel components. Figure 3-2 shows the display screen, which is
described in Table 3-1.
Figure 3-1: T703 Front Panel Layout
Figure 3-2: Display Screen and Touch Control
07223B DCN6378