Filter
Top Products
Specifications and Approvals Teledyne API T703 Calibrator Operation Manual
22
Table 2-2: T703 Specifications for Ozone Generator
Flow Rate 1 to 5 LPM adjustable
Concentration Minimum: 50 ppb at 2 LPM
Maximum: 5 ppm at 1 LPM
Output Maximum: 5 ppm LPM
Minimum: 100 ppb LPM
Response Time: 180 Sec. (98%)
Optical Feedback Standard
Table 2-3: T703 Specifications for O
3
Photometer
Ranges 100 ppb to 10 ppm, user selectable
Zero Noise 0.3ppb (RMS)
Span Noise <0.5%
Lower Detectable Limits 0.6 ppb (RMS)
Precision 1.0 ppb
Linearity 1.0% of Full Scale
Lag Time <10 seconds
Rise/Fall Time <20 sec (photometer response)
Zero Drift <1.0 ppb / 7 days
Span Drift <1% / 24 hours; <2% / 7 days
Flow Rate
800 cc
3
/min +/- 10%
2.2. CE MARK COMPLIANCE
EMISSIONS COMPLIANCE
The Teledyne API’s T703 Photometric O
3
Calibrator is designed to be fully compliant with:
EN61326 (1997 w/A1: 98) Class A, FCC Part 15 Subpart B Section 15.107 Class A, ICES-003 Class A (ANSI
C63.4 1992) & AS/NZS 3548 (w/A1 & A2; 97) Class A.
Test status: Pending.
SAFETY COMPLIANCE
The Teledyne API’s T703 Photometric O
3
Calibrator is designed to be fully compliant with:
IEC 61010-1:90 + A1:92 + A2:95,
Test status: Pending.
07223B DCN6378