Filter
Top Products
Troubleshooting 4-101
NovaJet 800 Series Service Manual
Figure 4-112. Demo Print.
2. Refresh printer firmware. Refer to the ‘Firmware Download’ proce-
dure.
Firmware Downloading Procedures
NJ850 Printer
1. Power on the printer. Verify current firmware version on printer to
see if a firmware upgrade is necessary. Select Utility Menu,
Service Menu, About - firmware version and boot code versions will
be displayed.
2. Power off printer and directly connect an IEEE 1284 compliant
parallel printer cable to the PC workstation and the printer.
3. Download firmware files into the same file directory. They can be
found on the Encad web site, www.encad.com.
4. Power on the printer.
5. If your printer is set up using a printer server, you can use the
ENCAD File Print Utility (EFPU) to download the new firmware to
your printer. The EFPU can be found on the System CD or
downloaded from Encad’s website, www.encad.com.
6. Using the EFPU, send the XXXX.ROM file to the printer.
Open the EFPU and press the Add button in the Folders section