Filter
Top Products
Maintenance 3-34
NovaJet 800 Series Service Manual
4 Vertical
Next Option
<>
Prev Option
selected
Cancel
Ok
*
Figure 3-21. 4 Vertical Options Menu.
5. Observe the plot and using either “Prev Option” or “Next Option”, rotate through the
selections until the one that best aligns the cartridge in slot 4 on the plot is
selected. Press “Ok” to accept the selection and return to the Color Calib Menu.
6. Continue until all seven vertical calibrations on the Color Calib Menu have been
accomplished.
7. To make adjustments to the horizontal alignments, follow similiar procedures as
those above but replace “vertical” with “horizontal”. The Horizontal Color Calibration
printout is shown on the lower half of Figure 3-18.
Deadband Alignments
Deadband calibration compensates for minute differences created when bidirectional
printing is used. Unidirectional printing is not affected by deadband. There are four types
of deadband tests:
Deadband
Slow Deadband
All Lines Tests
Single Line Test