Kodak 800 SERIES Camcorder User Manual


 
Maintenance 3-14
NovaJet 800 Series Service Manual
Servo Motor Winding Resistance Check
Figure 3-7. Servo Motor.
1. Disconnect the servo motor connection from J12 on the Main
PWA.
2. Using a standard ohmmeter or multimeter, connect the meter
leads to the two wires going to the motor.
3. While manually rotating the servo motor, monitor the readings on
the meter. The acceptable range is 2-12 ohms. Typically, the
reading is 3-8 ohms.
4. If the measurement is found to be unsatisfactory, replace the servo
motor.