Filter
Top Products
NovaJet 800 Series Service Manual
Assembly\Disassembly 5-19
Figure 5-10. Using the Belt Removal Tool.
6. Turn the movable side so that the tool begins to expand and the Frame
Tensioner Spring compresses. Continue to turn on the Belt Removal
Tool until the belt can be lifted off of the Servo Motor pulley.
7. Move the Carriage Belt to the left so it is out of the way of the Servo
Motor pulley.
8. Move the Carriage Assembly to the left end of the Slide Shaft.
9. Lift up gently and hold the right end of the Trailing Cables.
10. Remove the back screw on the Servo Motor. The screwdriver will be
held at a slight angle.
CAUTION
Be careful not to strip the head of the screw or to cause
damage to the Encoder Strip.