Filter
Top Products
Troubleshooting 4-81
NovaJet 800 Series Service Manual
ESD Problems
Figure 4-84. ESD Problem.
1. Intermittent Banding - jet failures.
2. OverSpray
3. Severe color loss in either 1x4 right or the 1x4 left print mode.
Verify media is not causing the problem. Change to a different media
type.
Dryer Failure/Sensor Error
From the top-level menu of the printer, check the sensor status.
Utility Menu
Service Menu
Diagnostic Menu
Accessory Menu
Sensor Status
The printer LCD will display the following information:
Dryer Mode: cccccccc
Plenum T. = ## deg. C
MBoard T. = ## deg. C
MBoard H. = ## pct. RH