Filter
Top Products
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
104
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
This section describes troubles that you may experience while
using the scanner, and the troubleshooting methods. Please
check the following items before you request a repair. If the
problem persists, check each item in "8.4 Before You Contact
the Scanner Service Provider" (page 121), and then contact
your FUJITSU scanner dealer or an authorized FUJITSU
scanner service provider.
The following are some examples of troubles that you may
experience.
8.3 Troubleshooting
Symptoms
"Scanner cannot be powered ON." (page 105)
"The Function Number Display switches OFF." (page 106)
"Scanning does not start." (page 107)
"Quality of the scanned photo/picture is poor when scanning in black &
white mode." (page 108)
"Quality of scanned text or lines is unsatisfactory." (page 109)
"Images are distorted or not clear." (page 110)
"Vertical streaks appear on the scanned image." (page 111)
""E" (or other numbers/letters) is already displayed on the Function
Number Display after power-on." (page 112)
"Multifeed error occurs frequently." (page 113)
"Situation in which the document is not fed into the ADF occurs
frequently." (page 115)
"Paper jams/pick errors occur frequently." (page 116)
"Scanned images turn out elongated." (page 117)
"A shadow appears at the top or the bottom of the scanned image."
(page 118)
"There are black traces on the document." (page 119)
"Paper jams occur frequently when scanning with the Carrier Sheet."
(page 120)
Symptoms