Fujitsu FI-6110 Photo Scanner User Manual


 
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
14
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
This section explains about the main features of this product.
The scanner is equipped with the following features.
Realizes a scanning speed of 20 ppm/40 ipm (under JPEG
compression)
The scanner can achieve a scanning speed of up to 20 ppm/40 ipm (300
dpi) with A4/Letter size color documents. Furthermore, you can load up
to 50 sheets of documents for continuous scanning which allows you to
quickly digitize a large volume of documents.
Capable of scanning documents larger than A4/Letter
size
The bundled "Carrier Sheet" allows you to scan documents that are
larger than A4/Letter size.
Function Number Display
The scanner mounts a "Function Number Display" which displays error
indications. It is used to easily check the status of the scanner.
Improved efficiency for pre-scan work
The scanner can perform "batch scanning" which allows you to scan
documents with different paper weight and size at once, simplifying the
process of sorting the documents before scanning.
Reduced work loss caused by multifeeds
The scanner mounts an ultrasonic multifeed sensor that accurately
detects "multifeed" errors where two or more sheets are fed through the
scanner at once. This multifeed detection is reliable even when scanning
a mixed batch of documents with different paper weight and size,
avoiding potential work loss.
Intelligent Multifeed function
When there is paper of the same size attached to a designated location
on the page, the Intelligent Multifeed function enables the scanner to
recognize the location of the attachment. This allows you to continue
scanning instead of pausing the scan by detecting every paper
attachment as multifeed.
Advanced image processing functions
The scanner’s automatic detection function outputs images in color or
monochrome by the document content.
1.1 Main Features