Filter
Top Products
Chapter 6 Daily Care
Appendix
Glossary
Introduction
Index
Contents
TOP
90
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Daily Care
Operational
Settings
The Carrier Sheet should be cleaned with either a piece of dry
cloth, a cloth/Cleaning Paper moistened with Cleaner F1/mild
detergent, or a sheet of Cleaning Wipe.
Gently wipe the dirt and dust off the surface and the inside of
the Carrier Sheet.
As you keep using the Carrier Sheet, dirt and dust will
accumulate on the surface and the inside.
Clean it regularly because it may result in scanning errors.
6.4 Cleaning the Carrier Sheet
z Never use paint thinner or any other organic solvents.
z Do not use force to rub against the Carrier Sheet because it
may be damaged or deformed.
z After cleaning the inside of the Carrier Sheet with Cleaning
Wipe or cloth moistened with Cleaner F1/mild detergent,
make sure that it is completely dry before closing the
Carrier Sheet.
z The Carrier Sheet should be replaced approximately every
500 scans.
For information on purchasing the Carrier Sheet, refer to
"7.4 Purchasing the Carrier Sheet" (page 98).