Filter
Top Products
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
62
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
Skipping Blank Pages
Blank pages (black or white) in the documents can be
detected and automatically deleted during scanning.
For example, when you scan a mixed batch of double-sided
and single-sided documents in duplex mode, the images are
generated without the back sides of the single-sided
documents (blank pages).
1 Load documents in the ADF paper chute.
For details, refer to "Chapter 2 How to Load Documents" (page 26).
2 Start up ScandAll PRO and click the [Scan] menu J
[Scanner Setting].
D The [TWAIN Driver (32)] dialog box appears.
3 Click the [Option] button.
D The [Option] dialog box appears.
4 Click the [Job/Cache] tab and check the [Blank Page Skip]
check box.
D The cache mode automatically switches to [Ram cache].
5 Use the slide bars of [Blank Page Skip] to adjust the ratios
to skip blank pages by.
Specify a sensitivity level from five levels (Low to High) for skipping
blank (white) pages. The larger the value is set, the more likely for the
pages to be detected as blank.
6 Click the [OK] button.
D It returns to the [TWAIN Driver (32)] dialog box.
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by clicking the [Tool]
menu J
[Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.