Filter
Top Products
Chapter 6 Daily Care
Appendix
Glossary
Introduction
Index
Contents
TOP
87
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Daily Care
Operational
Settings
The outside of the scanner, including the ADF paper chute
and the stacker, should be cleaned with either a piece of dry
cloth, a cloth/Cleaning Paper moistened with Cleaner F1/mild
detergent, or a sheet of Cleaning Wipe.
6.2 Cleaning the Outside
z Never use paint thinner or any other organic solvents.
z Do not let any moisture or water inside the scanner during
cleaning.
z It may take a long time to dry if an excessive amount of
Cleaner F1 is used. Moisten the cloth with moderate
quantity. Wipe off the cleaner completely to leave no
residue on the cleaned parts.
Thinner
Cleaner F1
or mild detergent
Cloth