Filter
Top Products
7
Chapter 7 Location and Function of Parts and Controls 127HDC-900/950/930 Series Product Information Manual
7-12. RM-B150, Hand-held Remote Control Unit
7-12-1 Operation Panel
a Shutter control block
A SHUTTER button (amber illumination)
Press and illuminate the button to set the
camera to Shutter mode. The current shutter
speed is shown on the display of the menu
operation block for a few seconds. In Shutter
mode, the shutter speed is adjusted with the
menu select knob (rotary encoder).
B ECS (Extended Clear Scan) button (amber
illumination)
Press and illuminate the button to set the
camera to ECS mode. The current ECS
frequency is shown on the display of the menu
operation block for a few seconds. In ECS
mode, the ECS frequency is adjusted with the
menu select knob (rotary encoder).
C S-EVS (Super EVS) button (amber illumination)
Press and illuminate the button to set the
camera to S-EVS mode. The current S-EVS
value is shown on the display of the menu
operation block for a few seconds. In S-EVS
mode, the S-EVS value is adjusted with the
menu select knob (rotary encoder).
1 Shutter control block
SHUTTER
ECS
SELECT
DISPLAY
ON
OFF
MENU
CANCEL ENTER
S-EVS
REW
STOP
F FWD
VTR
GAINOUTPUT
FILTER
KNEE
WHITE
MENU
M GAMMA DETAIL
PLAY
REC REVIEW
START/STOP
CAM
BARS
TEST
LOW
MID
HIGH
12345 ABCDE
ND
AUTO
KNEE
RB
CC
BLACK
MASTER
BLACK
REMOTE CONTROL UNIT RM-B150
RB
A
B PRE
AWB
ABB
AUTO
EXT
IRIS
ACTIVE STANDARD
IRIS/MB ACTIVE
2 Filter control block
3 Paint control block
4 White balance control block
5 Black balance control block
6 ACTIVE button
7 STANDARD button
8
Iris/master black control block
9 VTR control block
q; OUTPUT selector
qa GAIN selector
qs MENU operation block
SHUTTER
ECS S-EVS
123