Sony 950 Camcorder User Manual


 
2
Chapter 2 Total System 22HDC-900/950/930 Series Product Information Manual
2-7-1-1 HD System
*1 When installing the IF-789A/789P board (HKCU-901),
confirm that the RC-86 board is installed in the second slot
from the top.
*2 The second slot from the top on the rear side must have the
ADA-59 board (HKCU-902) installed.
*3 The third slot from the top on the rear side must have the
ADA-59 board (HKCU-902) installed.
* -NA
Combination of boards
System format
Combination of boards (Slots on the front)
Signal input/output slot
Second slot from the top Third slot from the top
1080/59.94I SDI RC/FC/LC/– RC/LC/IF
*1
/– Top most slot
1080/59.94I SDI Film Like FC RC/LC/– Second slot from the top
1080/59.94I Analog
RC
*2
IF/– Second slot from the top
RC/FC/LC
*3
Third slot from the top
1080/50I SDI RC/FC/LC/– RC/LC/IF
*1
/– Top most slot
HD-SDI Monitor
HDC-900
HDC-900
HDC-950
HDC-950
HDCU-900
HKCU-901
HKCU-902
HKCU-903
HKCU-904
HDCU-900
HKCU-901
HKCU-902
HKCU-903
HKCU-904
HDCU-900/950
HKCU-901/951
HKCU-902
HKCU-903/953
HKCU-904
HDCU-900/950
HKCU-901/951
HKCU-902
HKCU-903/953
HKCU-904
RCP-700/701
RCP-750/751
CNU-700
MSU-700A/750
Setting switches
System format
Switch setting
DPR-163 board (S804 : LOCAL)
AT-141
board
FC-83 board
S805 S807 S806 S603 S2 S2
1080/59.94I SDI NOT 60 Intr /1001 * *
1080/59.94I SDI Film Like NOT 48 PsF /1001 30 i
1080/59.94I Analog NOT 60 Intr /1001 * *
1080/50I SDI NOT 50 Intr /1000 * *