Filter
Top Products
ZPL II Commands for RFID
^RS
112
58978L-008 Rev. A RFID Programming Guide 11/14/2008
EPC tag ———————— —————— — *
UID Tag ———————— —————— — —
Mifare UltraLight — — — — — — — — — — — — — * * —
Table 9 • Supported Tag Types and Default Values (Continued)
Printer
UHF Printers HF Printers
R110Xi
R170Xi
R110PAX4
R4Mplus
RZ400/ RZ600
RP4T
R110Xi HF
R2844-Z
Firmware Version
R60.13.X
R60.15.8Z and R60.16.4Z
R60.16.5Z and later
R62.13.X
R62.15.X and later
R63.13.X
R63.15.X and later
SP994O, SP999E, SP1027E,
SP1082E, and earlier
SP994P, SP999F, SP1027F,
SP1082F, and later
SP1056D and earlier
SP1056E and later
R53.16.X and later
all
R65.13.X
R65.15.X and later
all
Tag Type
# = Default value * = Accepted value — = Not supported
a. Requires printers with RFID hardware version M4xxx...x. This will not work with RFID hardware version M5xxx...x. For the RFID
hardware version, refer to the RFID HW VER line on your printer configuration label, or perform the RFID SLOW test (see Perform RFID
Test on page 22).
b. Requires R60.13.0.13ZD or later.