Filter
Top Products
SGD Commands for RFID
rfid.reader_1.antenna_port
136
58978L-008 Rev. A RFID Programming Guide 11/14/2008
rfid.reader_1.antenna_port
Description This command sets or gets the RFID antenna port.
Type getvar; setvar
This table identifies the command for this format:
Commands Details
getvar
This command instructs the printer to respond with the current antenna
port.
Format: ! U1 getvar "rfid.reader_1.antenna_port"
setvar
This command instructs the printer to set the antenna port.
Format: ! U1 setvar "rfid.reader_1.antenna_port"
"value"
Va lues :
1 = antenna port 1
2 = antenna port 2
Default: 1
Example • This setvar example shows the selection of antenna port 2.
! U1 setvar "rfid.reader_1.antenna_port" "2"
When the setvar value is set to "2", the getvar result is "2".