Filter
Top Products
Troubleshooting
RFID Error Codes and Messages
60
58978L-008 Rev. A RFID Programming Guide 11/14/2008
0400
NO TAG
NO TAG FOUND
Note • This error message varies by reader type.
No RFID tag was detected in the RF field. Several things can
cause this error:
• No acceptable RFID tag is in the RF field. This can happen if an
RFID label is present but the transponder is not placed correctly
within the label or if the wrong tag type is used.
• The read/write power being used is too low.
• The RFID tag is weak or dead.
Retry with another RFID tag. Make sure you have the right tag
type selected and that you are using a tag that is supported by your
printer. If the problem persists, contact Technical Support.
8002
NO TAG
NO TAG FOUND
Note • This error message varies by reader type.
No RFID tag was detected in the RF field. Several things can
cause this error:
• No acceptable RFID tag is in the RF field. This can happen if an
RFID label is present but the transponder is not placed correctly
within the label or if the wrong tag type is used.
• The read/write power being used is too low.
• The RFID tag is weak or dead.
Retry with another RFID tag. Make sure you have the right tag
type selected and that you are using a tag that is supported by your
printer. If the problem persists, contact Technical Support.
0407
NOT IMPLEMENTED The reader received a command that is not supported by the tag
type.
Make sure that you have the latest reader firmware, that you have
the right tag type selected, and that you are using a tag that is
supported by your printer. If the problem persists, contact
Technical Support.
0603
NUM IDS TOO LG Internal problem with the reader. If the problem persists, contact
Technical Support.
0043
NVM FULL Internal problem with the reader. If you are upgrading reader
firmware, try resending the file. If the problem persists, contact
Technical Support.
Table 6 • RFID Error and Status Message Definitions (Continued)
Error
Code
RFID Error or
Status Message
Description/Action Required