Filter
Top Products
ZPL II Commands for RFID
^RA
92
58978L-008 Rev. A RFID Programming Guide 11/14/2008
Example 2 •This example reads the DSFID byte in ASCII format and returns
DSFID Byte:x to the host. The printer will retry the command three times if necessary. A
voided label is generated if the read is unsuccessful after these retries. The data read will go
into the
^FN1 location of the recalled format.
^XA
^FO20,120^A0N,60^FN1^FS
^RA1,0,3,0,D^FS
^HV1,,DSFID Byte:^FS
^XZ