Filter
Top Products
RFID Control Panel Parameters
26
58978L-008 Rev. A RFID Programming Guide 11/14/2008
Select the RFID Antenna Port
Note • This parameter appears only for the R110Xi HF printer.
This parameter displays the current antenna port.
Default: ANTENNA PORT 1
Selections: ANTENNA PORT 1, ANTENNA PORT 2
To change the value shown:
1. Press the left oval/MINUS (-) or the right oval/PLUS (+) to scroll
through the options.
RFID Error Status
During an error condition, an error message shows on the second line of the
display. See Table 6 on page 53 in the RFID Troubleshooting section for
descriptions of the error messages. This field cannot be modified.
Table 2 • RFID Parameters (Page 5 of 7)
Parameter Action/Explanation
RFID ANTENNA
ANTENNA PORT 1
RFID ERR STATUS