Filter
Top Products
133
SGD Commands for RFID
odometer.rfid.void_resettable
11/14/2008 RFID Programming Guide 58978L-008 Rev. A
odometer.rfid.void_resettable
Description This command gets the RFID void label counter value or resets the counter to
zero.
Type getvar; setvar
This table identifies the command for this format:
Commands Details
getvar
This command instructs the printer to respond with the current RFID void
counter value.
Format: ! U1 getvar "odometer.rfid.void_resettable"
setvar
This command instructs the printer to set the RFID void counter to zero.
Format: ! U1 setvar "odometer.rfid.void_resettable"
"value"
Va lues : “reset”
Example • This setvar example shows how the counter portion of the printer
configuration labels looks when the RFID void counter is reset by sending:
! U1 setvar "odometer.rfid.void_resettable" "reset"
Before
After