Filter
Top Products
Interface
Serial, TTP 2010
110
P1002902-002 TTP 2000 Technical Manual 09/14/2009
Serial, TTP 2010
The RS-232 interface of the TTP 2010 printer has a transfer speed that can be set to between
2 400 and 115200 bits/s.
Applications where text-only printouts are to be printed are suitable for serial interface
because of its easy to use bi-directional capability. The relatively low transfer speed limits the
printing speed when printing graphics. Full-width graphics with 115 200 bits/s result in
printing speeds of about 24 mm/s for the 80-mm version of the printer.
Figure 32 • Serial Interface Cable 10825-000
Setup Options
Default settings: 9600 bits/s, 8-bits, No parity, 1 stop bit, and hardware flow control.
See also: Default Parameter Settings on page 79.
Caution • Using a non-approved cable with the printer may void the FCC and other EMC
approvals of the printer.
Printer
PC
Female
5
9
4
8
3
7
2
6
1
Female
5
9
4
8
3
7
2
6
1
2
RxD
RxD
2
3
TxD
TxD
3
9RIRI9
6
DSR
DSR
6
8
CTS
CTS
8
4
DTR
DTR
4
7
RTS
RTS
7
1
DCD
DCD
1
5
GND
GND
5
Serial Cable 10825-000
Baud: 2 400, 4 800, 9 600, 19 200, 38 400, 57 600, and 115 200
bits/s
Flow control: None, Xon / Xoff, or Hardware
Data bits: 7/8
Stop bits: 1 (fixed)
Parity: None, Odd, or Even