Filter
Top Products
Operation
Installing a Paper Roll
30
P1002902-002 TTP 2000 Technical Manual 09/14/2009
Installing a Paper Roll
1. Turn the new paper roll as shown in Figure 18. The paper should be inserted into the
printer with the temperature-sensitive side up.
Figure 18 • Paper Roll Orientation
2. Tear off a full turn of the paper from the new paper roll.
Figure 19 • Tear Off a Full Turn from the New Paper Roll
3. Make sure the printer is turned ON.
Caution • This is important since the outer end of the paper is usually fixed to the roll with
glue or other adhesive substance that might cause a paper jam or print head damage.
Temperature-sensitive
coating
SW96074C
1
SW96075C
2
Glue or similar
substance