Filter
Top Products
Default Parameter Settings
Summary of Parameter Settings
82
P1002902-002 TTP 2000 Technical Manual 09/14/2009
Serial Interface Set-Up
Stores the communication speed on the serial interface.
Selects if 7-bit ASCII, or 8-bit, is used on the serial interface.
58 Out of paper level 0 page 96 XXX
59 USB vendor Class 0 (Printer Class) page 97 X
60 Partial cut length 10 page 97 XXX
TTP model
Parameter Description ESC&F Default
Page 2010 2020 2030
Note • When the printer is set up the way you like it to be, you send <ESC>&<4>, and all
settings will be stored.
1
96 Default
Baud Rate
11 Min
96 Max
<ESC>&P<1><24> 2400 bps
<ESC>&P<1><48> 4800 bps
<ESC>&P<1><96> 9600 bps
<ESC>&P<1><19> 19200 bps
<ESC>&P<1><38> 38400 bps
<ESC>&P<1><57> 57600 bps
<ESC>&P<1><11> 115200 bps
Note • If you set an invalid value, the baud rate will return to the previous value.
2
8Default
Data Bits
7 Min
8Max
<ESC>&P<2><8> 8-bits (characters 0-255)
<ESC>&P<2><7> 7-bits (characters 0-127)
Important • In 7-bit mode you can not print graphic, read status or set parameters because no
value can ever be greater than 127.