Filter
Top Products
Specifications
Dimensions
126
P1002902-002 TTP 2000 Technical Manual 09/14/2009
Figure 34 • Optional Mechanical Shutter
Universal Roll Holder
The flexible design of the Universal roll holder offers a number of paper roll positions for easy
installation of the printer in a variety of kiosk designs. There are three positions for horizontal
installations including High, Low and Under as well as a High position for vertical
installations. The roll holder arm can also be attached to the left or right side of the printer
which provides additional flexibility in kiosk installation.
The Universal roll holder spindle does not need to be adjusted for different paper widths. It can
accomodate all four paper widths supported by the TTP 2000 printer including 58mm, 60mm,
80mm and 82.5mm.
The roll holder arm alone accomodates paper rolls with an outer diameter up to 200mm in the
High position. The addition of the 104208 Adapter with strain relief is required in both the
Low and Under positions. The adapter used with the flexible roll holder arm supports paper
roll diameters up to 200mm in the Low position and up to 250mm in the Under position. An
optional paper low sensor can also be used with this roll holder.
Note • The optional mechanical shutter adds 7 mm to the depth of the printer. The shutter is
not suitable for use with the retract function.