Zebra Technologies TTP 2000 Photo Scanner User Manual


 
65
Programming
Software Command Syntax
09/14/2009 TTP 2000 Technical Manual P1002902-002
<ESC><ENQ><5> returns a 2-byte response, reflecting the status of all virtual sensors.
Virtual sensors maintain their functionality in all configurations of this printer, while physical
sensors reported by <ESC><ENQ><6> may signal differently depending on installation
factors such as vertical or horizontal installation.
The same physical sensor can give several virtual statuses depending on when the sensor is
activated in the print cycle.
The first byte of the response is reserved for future use.
Second Byte:
Figure 27 • Physical-to-Virtual Sensor Mapping
ESC ENQ 5
Sensor Enquiry
1B 05 05 hex
27 5 5 decimal
76543210Bit
Sensor 1, Paper before head
Sensor 2, Black mark
Sensor 3, Paper after head
Sensor 4, loop ready
Sensor 5, presenter
Sensor 6, retract ready
Sensor 7, in retract
Sensor 8, at bin
Horizontal
Vertical
Paper entry
Paper entry
Printout exit
Retract exit
Cutter
Retract exit
Printout exit
Cutter