Filter
Top Products
Product Presentation
Controls
12
P1002902-002 TTP 2000 Technical Manual 09/14/2009
Controls
Figure 3 • Rear View
The Feed button and indicators are duplicated on both sides of the printer so that they are
easily accessible regardless of how the printer is installed.
Feed Button
The | blue Feed button has several functions:
• Press and release will feed, cut, and present a complete page.
• Any data in the print buffer will be printed.
If the buffer is empty the page will be blank.
In black-mark mode, the page will be synchronized with the black-mark.
• On printer with firmware 3.83 and higher, press and hold Feed for three seconds while
turning on the power, or press and hold Feed just after closing the print head, will print a
self-test printout.
• On printers with old firmware, lower than version 3.83, press and hold Feed while turning
on the printer or press and hold Feed just after closing the print head, to print a self-test
printout (See Making a Self-Test Printout on page 26).
• Press and hold Feed while closing the print head and the printer will enter top of form
sensor calibration mode (see Black Mark Calibration Process on page 103).
Feed Button
Status Indicator
Power Indicator
Printhead lock/
cutter protection
Interface
Connector
Power
Connector
Paper low
Connector
Print Head
lock/cutter guard
F
e
e
d
P
o
w
e
r
S
t
a
t
u
s
R