Filter
Top Products
13
Product Presentation
Controls
09/14/2009 TTP 2000 Technical Manual P1002902-002
Power Indicator
When the ● green power indicator is illuminated, a 24V supply is connected to the printer.
Status Indicator
The ● orange status indicator has several functions:
• ON constantly — the printer is operational
• Flash, flash, pause, flash, flash— is the warning-code for paper low.
The warning-code is reset automatically when the condition causing it is removed. This
behavior can be enabled by setting parameter 52 (Warning Level) to 001.
• Flashes rapidly — indicates error. Press and hold the Feed button and the number of
flashes will reflect the status-code.
Status codes are reset when:
• the conditions causing them are removed
• the printer is power cycled (turned off/on)
• the print head is lifted and then lowered to clear a paper jam.
1 Presenter jam, paper cannot be ejected / retracted
2 Cutter cannot return to home position
3 Out of paper
4 Print Head lifted
5 Paper feed error (under head)
6 Temp error, print head is above 60°C
7 Paper jam during present
8 Paper jam during retract
10 Black mark not found (on media load)
11 Black mark calibration error
Fast flashes Checksum error at firmware loading
Steady light Wrong firmware type