Filter
Top Products
100 en | Using the IP Interface AutoDome Junior HD
F.01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc.
Events such as the triggering or end of alarms are shown in the
Event Log field. You can save these messages automatically in a
file (see the AutoDome Junior online help).
1. If you want to delete the entries, click the delete icon in
the top right-hand corner of the relevant field.
2. If you want to view a detailed log, click the icon in the top
right-hand corner of the relevant field. A new window will
open.
11.5.1 Entering a Keyboard Control Command
The Aux Control tab is used to enter keyboard control
commands. These commands are composed of a command
number plus the appropriate function key (Show Shot, Set Shot
Aux On or Aux Off). A valid combination either issues a
command to the camera or displays an on-screen menu.
Aux Control Tab
The Aux Control tab is used to enter pre-programmed keyboard
control commands.
To access the Aux Control tab, navigate to the Livepage and
click the Aux Control tab (see Figure 11.3 below).
Figure 11.3 Aux Control Tab
1 Command number field
2 Keypad (numbers 0-9)
3 Show a preset shot
4 Set a preset shot
5 Initiates a command
6 Deletes a number in the Command Number field
7 Used to select a menu item
8 Stops a command