Filter
Top Products
78 en | Preparing the Wiring AutoDome Junior HD
F.01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc.
8.2 Connecting the Power
The AutoDome Junior HD is available as an indoor or an outdoor
model. Power to the camera in all models is supplied either via
a single 24 VAC isolated power connector (red and black wires)
or via a Power over Ethernet + (PoE+, IEEE 802.3at, class 4)
connection using the existing CAT 5E Ethernet cable. Power to
the heater is supplied via a single 24 VAC isolated power
connector (white/red and white/black wires).
WARNING!
The indoor or outdoor AutoDome Junior HD camera can accept
power from the 24 VAC power input or from the Ethernet input.
Ensure that the camera receives power from only one source.
Refer to Section 8.3 Ethernet Connection, page 81, for more
information about connecting Power over Ethernet.
NOTICE!
Use certified / Listed Class 2 power supply transformer only.