Filter
Top Products
AutoDome Junior HD Configuring the AutoDome Junior HD | en 143
Bosch Security Systems, Inc. Installation Manual F.01U.275.803 | 6.0 | 2012.11
Recording media
Select the required recording media here so that you can then
activate them and configure the recording parameters.
iSCSI Media
If you want to use an iSCSI system as a recording medium, you
must set up a connection to the required iSCSI system and set
the configuration parameters.
1. Enter the IP address of the required iSCSI destination in
the iSCSI IP address field.
2. If the iSCSI destination is password protected, enter this
into the Password field.
3. Click the Read button. The connection to the IP address
will be established. In the Storage overview field, you can
see the corresponding logical drives.
Local Media
The supported local recording media are displayed in the
Storage overview field.
Activating and Configuring Storage Media
The storage overview displays the available storage media. You
can select individual media or iSCSI drives and transfer these to
the Managed storage media list. You can activate the storage
media in this list and configure them for storage.
NOTICE!
The iSCSI storage system selected must be available on the
network and completely set up. Amongst other things, it must
have an IP address and be divided into logical drives (LUN).
CAUTION!
Each storage medium can only be associated with one user. If a
storage medium is already being used by another user, you can
decouple the user and connect the drive with the AutoDome
Junior HD. Before decoupling, make absolutely sure that the
previous user no longer needs the storage medium.