Filter
Top Products
AutoDome Junior HD BVIP Firmware Updates | en 185
Bosch Security Systems, Inc. Installation Manual F.01U.275.803 | 6.0 | 2012.11
16 BVIP Firmware Updates
The AutoDome Junior HD incorporates a network video server
in the IP module. The primary function of the server is to
encode video and control data for transmission over a TCP/IP
network. The AutoDome Junior IP and HD also allows an
operator to update the BVIP firmware via the TCP/IP network.
The latest BVIP firmware is available on the Bosch Security
Systems Web site. To download the service pack from the Web,
navigate to www.boschsecurity.us, click the CCTV link, then
click Cameras, PTZ and navigate to the product page for the
AutoDome Junior HD. Then click the Software tab on the
product page.
16.1 Upgrading the AutoDome Junior IP or HD
The preferred method to update an AutoDome Junior IP or HD
is through a direct connection between the camera and a PC.
This method entails connecting the Ethernet cable from the
camera directly to the Ethernet port of a PC.
If the direct-connect method is not practical you can also
update the AutoDome Junior IP through a Local Area Network
(LAN). You cannot, however, update the AutoDome Junior IP or
HD through a Wide Area Network (WAN) or via the Internet.