Filter
Top Products
52 en | Installing a Recessed Mount AutoDome Junior HD
F.01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc.
6. Connect the mating connectors (supplied in the accessory
kit) with the flying leads to the user supplied wiring (see
the Section 8 Preparing the Wiring, page 77 for wiring
information).
7. Plug the matching connectors from the camera into the
mating connectors from the ceiling.
Figure 6.6 Match Connectors
8. Attach the camera to the mounting plate by inserting the
vertical tab on the plate (item 1, below) into the recessed
slot on the top of the camera dome (Item 3) to the right of
the safety locking screw (item 2).
Note: Do not loosen the three brass buttons (item 4).
These brass buttons engage the slotted tabs (item 5) on
the mounting plate.
1 Locking Screw
2 Crescent Shape
3Mounting Plate
4 Vertical Tab