Filter
Top Products
42 en | Installing a Wall Mount AutoDome Junior HD
F.01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc.
Figure 5.7 Attach Mounting Plate to Dome Cap
2. Route wires on side of mounting plate with crescent
shaped cut-out (Ref. #2 Figure 5.7).
3. Attach grounding wire from unit to the mounting cap.
4. Attach user supplied ground to junction box.
5. Connect the mating connectors with the flying leads to the
user supplied wiring (see the Section 8 Preparing the
Wiring, page 77 for wiring information).
1 Cable Hole (40 mm maximum; crescent shape)
2 Mounting Screws for Dome Cap
4
0
.0 mm
1.57 in.