Filter
Top Products
AutoDome Junior HD Configuring the AutoDome Junior HD | en 121
Bosch Security Systems, Inc. Installation Manual F.01U.275.803 | 6.0 | 2012.11
12.14 Livepage Functions
On this page you can adapt theLivepage functions to your
requirements. You can choose from a variety of different
options for displaying information and controls.
1. Check the box for the items that are to be made available
on the Livepage. The selected items are indicated by a
check mark.
2. Check whether the required functions are available on the
Livepage.
Transmit Audio
You can only select this option if audio transmission is actually
switched on (see Section 12.28 Audio, page 141).The audio
signals are sent in a separate data stream parallel to the video
data, and so increase the network load. The audio data are
encoded according to G.711 and require an additional
bandwidth of approx. 80 kbps for each connection.
Lease time (s)
The lease time in seconds determines the time beyond which a
different user is authorized to control the camera after no
further control signals are received from the current user. After
this time interval, the camera is automatically enabled.
Show alarm inputs
The alarm inputs are displayed next to the video image as icons
along with their assigned names. If an alarm is active, the
corresponding icon changes color.
Show relay outputs
Relay outputs are shown next to the video image as icons, along
with their assigned names. If the relay is switched, the icon
changes color.
Show VCA trajectories
When video content analysis (VCA) is activated, check this item
to show additional information that traces the path of objects.