Filter
Top Products
62 en | Installing a Recessed Mount AutoDome Junior HD
F.01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc.
2. Remove the screw from the Earth ground ( )on the
inside of the VJR-A3-JW.
3. Attach a user-supplied ground wire to the Earth ground
( ) screw hole on the VJR-A3-JW and secure with the
screw.
4. Attach the green grounding wire from the unit to the
grounded ( ) screw hole on the VJR-A3-JW using the
attached captive screw washer.
5. Route wires through the knockout on the VJR-A3-JW.
6. Connect the mating connectors (supplied in the VJR
AutoDome accessory kit) with the flying leads to the user
supplied wiring (see the AutoDome Junior Installation
Manual for complete wiring information).
7. Plug the matching connectors from the camera into the
mating connectors from the ceiling.
CAUTION!
All wires for installation applications must be routed through a
grounded conduit.