Filter
Top Products
AutoDome Junior HD Configuring the AutoDome Junior HD | en 175
Bosch Security Systems, Inc. Installation Manual F.01U.275.803 | 6.0 | 2012.11
– Date/time suffix
The date and time are automatically added to the file
name. When setting this parameter, ensure that the unit's
date and time are always correctly set. Example: the file
snap011005_114530.jpg was stored on October 1, 2005 at
11:45 and 30 seconds.
Posting interval
Enter the interval in seconds at which the images will be sent to
an FTP server. Enter zero if you do not want any images to be
sent.
FTP server IP address
Enter the IP address of the FTP server on which you wish to
save the JPEG images.
FTP server login
Enter your login name for the FTP server.
FTP server password
Enter the password that gives you access to the FTP server.
Path on FTP server
Enter the exact path on which you wish to post the images on
the FTP server.
Max. Bit Rate
You can limit the bit rate for FTP posting.
12.50 IPv4 Filter
Use this setting to configure a filter that allows or blocks
network traffic that matches a specified address or protocol.
IP Address 1 / 2
Enter the IPv4 address that you want to allow or block
Mask 1 / 2
Enter the subnet mask for the appropriate IPv4 address.