Filter
Top Products
AutoDome Junior HD Using the IP Interface | en 105
Bosch Security Systems, Inc. Installation Manual F.01U.275.803 | 6.0 | 2012.11
11.9 Processor Load
If the AutoDome Junior IP is accessed via the Web browser, you
will see the processor load indicator in the top left of the
window next to the manufacturer's logo.
You can obtain additional information to help when you
troubleshoot or fine-tune the unit. The values indicate the
proportions of the individual functions on the encoder load,
shown as percentages.
Move the cursor over the graphic indicator. Some
additional numerical values are also displayed.
11.10 The PLAYBACK Page
The RECORDINGS page for playing back recorded video
sequences can be accessed from the LIVEPAGE and from the
SETTINGS menu.
The PLAYBACK link is only visible if a storage medium has been
selected.
Click the PLAYBACK link in the navigation bar in the upper
section of the window. The playback page appears.
Selecting Recordings
All sequences that are saved are displayed in the list. A running
number (track) is assigned to each sequence. Start time and
stop time, recording duration, number of alarms, and recording
type are displayed.
1. Click a list entry. The playback for the selected sequence
starts immediately in the video window.
2. Use the arrow buttons below the list to browse the list.
3. Select the number of entries that are displayed
simultaneously.