Filter
Top Products
30 en | Installing a Surface Mount AutoDome Junior HD
F.01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc.
11. Route the external wires through the conduit and into the
Surface Mount Adapter.
12. Secure the mounting plate to the Surface Mount Adapter
with the three (3) M4 – .7 x 8 Phillips pan head machine
screws.
Figure 4.8 Install the Mounting Plate
13. Skip to Section 4.1.4 Installing the Camera to the Mounting
Plate, page 30, to continue the installation.
4.1.4 Installing the Camera to the Mounting Plate
To install the camera to the mounting plate for a surface or
suspended ceiling, do the following:
1. Route wires on side of mounting plate with crescent
shaped cut-out (Ref. #2 Figure 4.3).
2. Attach grounding wire from unit to junction box.
3. Attach user supplied ground to junction box.
4. Connect the mating connectors with the flying leads to the
user supplied wiring (see Section 8 Preparing the Wiring,
page 77 for wiring information).
CAUTION!
All wires for installation applications must be routed through a
grounded conduit.
1 Junction Box Holes
2 Cable Hole (40 mm maximum); Crescent Shape
4
0 .0 mm
1.57 in.