Filter
Top Products
AutoDome Junior HD Using the IP Interface | en 101
Bosch Security Systems, Inc. Installation Manual F.01U.275.803 | 6.0 | 2012.11
To Enter a Keyboard Control Command:
1. Place the cursor in the Command Number field.
2. Click the desired command number via the on-screen
keypad.
3. Click either the Aux On or the Aux Off button to initiate or
stop the command.
4. If the command initiates a menu, use the Up/Down arrows
on the View Control to navigate the menu. Click the Focus
or Iris button to select a menu item.
To Set a Preset Shot:
Preset shots (or scenes) are camera positions that are saved in
memory for future use.
1. Move your cursor over the live image and wait for the area
to display a directional arrow.
2. Click and hold a mouse button to pan to the desired
position you want to save.
3. Click any number combination from 1-64 from the on-
screen keypad to identify the scene number.
4. Click the Set Shot button. The image area displays a
message that indicates which shot number was saved.
To View a Preset Shot:
1. Click the number of the scene you want to view using the
on-screen keypad.
2. Click the Show Shot button.
NOTICE!
For more information about the AutoDome Junior HD settings
and controls, click the Help on this page? link to open the
AutoDome Junior online help.