Filter
Top Products
118 en | Configuring the AutoDome Junior HD AutoDome Junior HD
F.01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc.
12.11 Date/Time
Date format
Select your required date format.
Device date/Device time
If there are multiple devices operating in your system or
network, it is important to synchronize their internal clocks. For
example, it is only possible to identify and correctly evaluate
simultaneous recordings when all units are operating on the
same time.
1. Enter the current date. Since the unit time is controlled by
the internal clock, there is no need to enter the day of the
week – it is added automatically.
2. Enter the current time or click the Sync to PC button to
copy your computer's system time to the AutoDome Junior
HD.
Device time zone
Select the time zone in which your system is located.
Daylight saving time
The internal clock can switch automatically between normal
and daylight saving time (DST). The unit already contains the
data for DST switch-overs up to the year 2018. You can use
these data or create alternative time saving data if required.
NOTICE!
A new password is only saved when you click the Set button.
You should therefore click the Set button immediately after
entering and confirming a password.
NOTICE!
If you do not create a table, there will be no automatic
switching. When changing and clearing individual entries,
remember that two entries are usually related to each other and
dependent on one another (switching to summer time and back
to normal time).