Filter
Top Products
AutoDome Junior HD Getting Started | en 87
Bosch Security Systems, Inc. Installation Manual F.01U.275.803 | 6.0 | 2012.11
10 Getting Started
Once the installation is complete, the AutoDome Junior HD can
be programmed. A typical system may include a keyboard,
matrix switcher, monitor, appropriate wiring connections, and a
PC with Internet Explorer. Please refer to the individual product
manuals for complete installation and setup instructions for
each of the system components.
10.1 Powering On
When you turn the AutoDome Junior power on there is a ten
(10) second pause before the dome starts its homing phase.
During the homing phase the camera pans left and right and
tilts up and down. It also adjusts the lens focus. The entire
homing phase lasts approximately 20 seconds and ends with a
splash screen. Refer to Section 11 Using the IP Interface,
page 88.
WARNING!
Before powering the dome on, remove the clear protective
plastic sheet on top of the bubble.