Filter
Top Products
AutoDome Junior HD Configuring the AutoDome Junior HD | en 141
Bosch Security Systems, Inc. Installation Manual F.01U.275.803 | 6.0 | 2012.11
12.26 Miscellaneous
Address
Allows the appropriate dome to be operated via the numerical
address in the control system. Type a number between 0000
and 9999, inclusive, to identify the camera.
12.27 Logs
To save the log file information:
1. Click Download to obtain the log information.
2. Click Save.
3. Navigate to the directory in which you want to store the log
information.
4. Type a name for the log file and click Save.
12.28 Audio
You can set the gain of the audio signals to suit your specific
requirements. The current video image is shown in the small
window next to the slide controls to help you check the audio
source and improve assignments. Your changes are effective
immediately.
If you connect via Web browser, you must activate the audio
transmission on the Livepage Functions page (see
Section 11.5 The Livepage, page 95). For other connections, the
transmission depends on the audio settings of the respective
system.
Audio
The audio signals are sent in a separate data stream parallel to
the video data, and so increase the network load. The audio
data are encoded according to G.711 and require an additional
bandwidth of approx. 80 kbps for each connection. If you do
not want any audio data to be transmitted, select Off.
Line In
You can set the line input gain. Make sure that the display does
not go beyond the green zone during modulation.