Filter
Top Products
AutoDome Junior HD Preparing the Wiring | en 77
Bosch Security Systems, Inc. Installation Manual F.01U.275.803 | 6.0 | 2012.11
8 Preparing the Wiring
All AutoDome Junior HD units provide three standard cables: an
Ethernet cable, a 24 VAC power input cable for the camera, and
an alarm input/output cable. An Outdoor AutoDome Junior HD
unit provides an additional 24 VAC power input cable for the
heater.
The Ethernet connection carries control and video information
and can deliver power to the camera via the Power-over-
Ethernet Plus (PoE+) standard. Refer to Section 9 Audio, Alarms
and Relay Connections, page 82, for alarm connection
information.
8.1 Power
The recommended power cable is a 2-conductor, 14-18 gage
cable, depending on the distance.
Table 8.1 Max. Wire Distance from Power Supply to AutoDome Junior HD
CAUTION!
Installation should only be performed by qualified service
personnel in accordance with the National Electrical Code or
applicable local codes.
CAUTION!
All wires for installation applications must be routed through a
grounded conduit.
Watts 14 AWG
(2.5 mm)
16 AWG
(1.5 mm)
18 AWG
(1.0 mm)
Camera, All models
24 VAC to AutoDome Junior HD 17 670 ft
(204 m)
421 ft
(128 m)
265 ft
(81 m)
Heater, Outdoor models only
24 VAC to Heater 25 455 ft
(139 m)
287 ft
(67 m)
180 ft
(55 m)