Filter
Top Products
AutoDome Junior HD Using the IP Interface | en 93
Bosch Security Systems, Inc. Installation Manual F.01U.275.803 | 6.0 | 2012.11
The AutoDome Junior HD defaults are as follows:
– IP Address: 192.168.0.1
– Subnet Mask: 255.255.255.0
– Gateway IP Address: 0.0.0.0
The following sections provide instructions about installing the
software necessary to view images over an IP connection,
configuring the IP network settings and accessing the
AutoDome Junior IP images from a Web browser.
11.4.1 Changing the Network Settings
The AutoDome Junior HD has a default IP address of
192.168.0.1. To change the IP address or any network settings,
you can use the Configuration Manager software or the
AutoDome Junior IP server.
Using the Configuration Manager
Configuration Manager is an optional network utility provided
on the Bosch Security Systems Web site. Use the Configuration
Manager Manual to make any configuration changes.
Using the AutoDome Junior HD Web Server
To configure the camera using the AutoDome Junior HD server,
do the following:
1. Set the IP address on the PC to 192.168.0.10 to ensure
that the PC and the IP AutoDome are on the same Subnet.
2. Launch Microsoft Internet Explorer and navigate to the
following URL: http://192.168.0.1
The Web browser opens the LivePage for the AutoDome
Junior HD; a security warning message is displayed.
NOTICE!
Contact your local network administrator for a valid IP address,
Subnet Mask, and a Gateway IP Address.
NOTICE!
Depending on the PC network security settings, the user may
have to add the new IP address to the browser’s trusted sites
list for the AutoDome Junior HD controls to operate.