Filter
Top Products
AutoDome Junior HD Configuring the AutoDome Junior HD | en 135
Bosch Security Systems, Inc. Installation Manual F.01U.275.803 | 6.0 | 2012.11
12.21 Lens Settings
Auto Focus
Continuously adjusts the lens automatically to the correct focus
for the sharpest picture.
– One Push (default): activates the Auto Focus feature after
the camera stops moving. Once focused, Auto Focus is
inactive until the camera is moved again.
– Auto Focus: Auto Focus is always active.
– Manual: Auto Focus is inactive.
Focus Polarity
– Normal (default): focus controls operate normally.
– Reverse: focus controls are reversed.
Focus Speed
Controls how fast the Auto focus will readjust when the focus
becomes blurred. Select from the following options:
– Super Slow
– Slow
– Medium
– Fast
Auto Iris
Automatically adjusts the lens to allow the correct illumination
of the camera sensor. This type of lens is recommended for use
where there are low light or changing light conditions.
– Constant (default): camera constantly adjusts to varying
light conditions (default).
If you select this option, the AutoDome Junior HD makes
the following changes automatically:
– Gain Control: switches to AGC
–Shutter Mode: switches to Normal
– Manual: camera must be manually adjusted to compensate
for varying light conditions.