Filter
Top Products
154 en | Configuring the AutoDome Junior HD AutoDome Junior HD
F.01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc.
12.38 VCA
The AutoDome Junior HD contains an integrated video content
analysis (VCA), which can detect and analyze changes in the
signal on the basis of image processing. Such changes can be
due to movements in the camera's field of view.
You can select various VCA configurations and adapt these to
your application as required. The Silent MOTION+ configuration
is active by default. In this configuration, metadata is created to
facilitate searches of recordings; however, no alarm is
triggered.
1. Select a VCA configuration and make the required settings.
2. If necessary, click the Default button to return all settings
to their default values.
VCA Profiles
You can configure two profiles with different VCA
configurations. You can save profiles on your computer's hard
drive and load saved profiles from there. This can be useful if
you want to test a number of different configurations. Save a
functioning configuration and test new settings. You can use
the saved configuration to restore the original settings at any
time.
1. Select a VCA profile and enter the required settings.
2. If necessary, click the Default button to return all settings
to their default values.
3. Click the Save... button to save the profile settings to
another file. A new window is opened, in which you can
specify where you want to save the file and what name you
want to save it under.
4. Click the Load... button to load a saved profile. A new
window opens in which you can select the profile file and
specify where to save the file.
VCA configuration
Select one of the profiles here to activate it or edit it.
You can rename the profile.