Bosch Appliances VJR SERIES Security Camera User Manual


 
166 en | Configuring the AutoDome Junior HD AutoDome Junior HD
F.01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc.
Automatic IP assignment
If a DHCP server is employed in the network for the dynamic
assignment of IP addresses, you can activate acceptance of IP
addresses automatically assigned to the AutoDome 800 Series.
Certain applications (VIDOS, Bosch Video Management System,
Archive Player, Configuration Manager) use the IP address for
the unique assignment of the unit. If you use these applications,
the DHCP server must support the fixed assignment between IP
address and MAC address, and must be appropriately set up so
that, once an IP address is assigned, it is retained each time the
system is rebooted.
12.46.1 IPv4
IP address
Enter the desired IP address for the AutoDome 800 Series in
this field. The IP address must be valid for the network.
Subnet mask
Enter the appropriate subnet mask for the selected IP address
here.
Gateway address
If you want the unit to establish a connection to a remote
location in a different subnet, enter the IP address of the
gateway here. Otherwise leave the box blank (0.0.0.0).
12.46.2 IPv6
Consult with the network administrator before making changes
to the this section.
CAUTION!
If you change the IP address, subnet mask or gateway address,
the AutoDome 800 Series is only available under the new
addresses after the reboot.