Filter
Top Products
176 en | Configuring the AutoDome Junior HD AutoDome Junior HD
F.01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc.
12.51 Advanced Mode: Service
12.52 Maintenance
Firmware
The AutoDome Junior HD is designed in such a way that its
functions and parameters can be updated with firmware. To do
this, transfer the current firmware package to the unit via the
selected network. It will then be automatically installed there.
In this way, an AutoDome Junior HD can be serviced and
updated remotely without a technician having to change the
installation on site.
Refer to Section 16 BVIP Firmware Updates, page 185, for
firmware upgrade instructions.
CAUTION!
Before launching the firmware upload make sure that you have
selected the correct upload file. Uploading the wrong files can
result in the unit no longer being addressable, in which case
you must replace the unit.
You should never interrupt the installation of firmware. An
interruption can lead to the flash-EPROM being incorrectly
programmed. This in turn can result in the unit no longer being
addressable, in which case it will have to be replaced. Even
changing to another page or closing the browser window leads
to an interruption.
Refer to Section 16 BVIP Firmware Updates, page 185, for
firmware upgrade instructions.